Pole Shaft:
Thee pole shall be a one section design conforming to ASTM A595 Grade A or ASTM A572 Grade 55 with a constant taper rate of .14 in/ft. Pole will be cylindrical in cross-section and will have a full length longitudinal weld.

Embed:
Wire way access 24” below ground line. Mastic coating available for additional protection of embeded pole.

Handhole:
A reinforced hand hole, having a nominal opening of 3”x 5” or 4” x 6.5” will be installed 18” above the base plate. A hand hole cover with hardware will be included along with grounding provisions.

Pole Top:
Each pole will be provided with a welded top plate and tenon or top cap for poles receiving  drilling for side mount fixtures.

Finish:
Standard color finishes shall be coated with TGIC polyester powder or hot dip galvanized to ASTM A-123 specifications.