(0) Saved Items


Round Tapered Steel Pole Made in USA

Pole Shaft:The pole shall be a one section design conforming to ASTM A595 Grade A or ASTM A572 Grade 55 with a constant taper rate of .14 in/ft. Pole will be cylindrical in cross-section and will have a full length longitudinal weld. Base Plate:The base plate is fabricated from a structural quality hot rolles carbon steel plate that meets or exceeds ASTM A-36 with a minimum yield strength of 36,000 psi. The base plate telescopes the pole shaft and is circumferential welded top and bottom. Base Cover:The two-piece standard full base cover is fabricated from ABS plastic. Optional two-piece steel base cover also available. Anchor Bolts:Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end in accordance with ASTM A-153. Handhole:A reinforced hand hole, having a nominal opening of 3”x 5” or 4” x 6.5” will be installed 18” above the base plate. A hand hole cover with hardware will be included along with grounding provisions. Pole Top:Each pole will be provided with a welded top plate and tenon or top cap for poles receiving  drilling for side mount fixtures. Finish:Standard color finishes shall be coated with TGIC polyester powder or hot dip galvanized to ASTM A-123 specifications.
Specification Sheet


Ratings & Compliance

  • Made in America


  • 10 yr