For numerous reasons, good lighting is essential: it helps you to view the surroundings and details around you, offers the correct setting, and enhances the aspect of a room. Traditional fluorescent lamps are frequently faint and unexpected, and panel removal is required in order to change bulbs and clean the dust and insects (yuck!). The flat panel LED illumination gives up to 50,000 hours of the gorgeous skylight while consuming half the power of standard fluorescent lamps. Less maintenance, cheaper costs, and an improved look are certainly the best alternative for LED lighting.
Flat Panel LED lighting can provide the ideal light source for various settings. A couple of the flat panels of LED illumination are excellent for warehouses, workplaces, schools, and hospitals. However, it is just the first stage to decide whether to utilize flat LED lighting. Flat-panel LEDs are offered in illuminated back and edge light varieties, each with its own advantages and disadvantages.
What do Edge-Lit Panel Lights Do?
The light source for a lighted edge panel lies along the circumference of the panel, often covered with aluminum alloys. The light on the periphery is subsequently distributed toward the center, which results in a totally uniform, shadowless light dispersion. For instance, this form of lighting is great for industrial facilities with bookshelves: as the light disperses uniformly, the view between shelves can be obstructed by little to no shades.
Because these panels can be made thinner than previously, the LED light sources are around the corners. Different modes of installation, including suspension, recessing, or mounting, are provided through thin panels. This versatility provides an advanced look according to on region they are employed in.
Key Features of Edge-Lit Flat Panel Lights
This sort of LED panel, as its name indicates, features LEDs that are on the edge of the framework. Light emanates lateral and is scattered across a panel of light guides.
-
Design flexible
LED panel lights allow the light transmission system to benefit. This enables designers to generate the entire range of colored lights and forms of a restaurant or office configuration.
-
Super luminosity
The closed construction and relatively high-quality reflecting panels contribute to excellent brightness, which is a key advantage of LED lighting. Furthermore, aluminum frame panels and lights are capable of offering even superior brightness.
-
Less thermal waste
LEDs are famous because they are capable of dissipating less heat that shows very low energy demand. A small amount of heat is created with adequate heat dissipation, ideal for homes and offices with restricted rooms, particularly during the summer. This is vital.
-
The length of life
Typically these led panel lights can last for up to 80,000 to 100,000 hours if managed properly. This indicates that these led panel lights may live approximately 27 years if indeed the light is 7 to 8 hours per day.
-
Adjustment of the lighting
Most LED panel lights allow for control of light brightness, allowing the user to take advantage of even gentle, easy-to-look light and prevent harsh, uncomfortable lighting if necessary.
-
Shock control
These LED panel lamps are shockproof and not simple to break. Many lights are made from hard resin or aluminum frames rather than glass. Moreover, it helps tackle the problem of excessive temperatures.
-
Controllers
The user may use an additional controller to regulate the led panel light, which achieves several effects, such as altering the light intensity and spectral composition.
What makes Back-Lit Fixtures Different than Edge-Lit Panels?
Only there – at the rear of the panel – is the light source for rear-light panels. The light is spread over the panel from the source and dispersed equally in the space. In order to create a consistent light dispersion, backlight panels are inherently thicker, and consequently, the possibilities are limiting.
Even though backlit panels wouldn’t have the sleek and beautiful look of a lighted edge board, their financial advantages should be noted. They cost well below the edge illuminated boards, which means less money spent for the original project and more money! Less LED bulbs are needed as compared to the full panel in a backlit panel, as even the illumination is placed in the same region. Fewer bulbs are tantamount to less electricity, more efficiency, and more money saved over time. And who doesn’t want to save extra income?
At last, light sources with a few main distinctions are the light-filled edge and rear-lighted boards. Both give brilliant, direct sunlight and represent a significant improvement from standard fluorescent lamps. To establish the optimum light source for your area, it is vital to analyze all characteristics of these light sources, including aesthetics, usability, effectiveness, and quality.
The back-lit panels are set up with LEDs, yes, on the back of the frame rather than with LEDs on the borders that are indirectly illuminated. The LEDs point right through the diffuser and shine a light.
Key Features of Back-Lit Flat Panel Lights
- No Light Guide Panel Since light shines straight ahead, no light guidance panel is necessary. Rather, the panel’s design has a filter that nonetheless offers smooth and uncluttered light. Back-Lit Panel removes this danger, so lesser lights guides might be susceptible to fading.
- Backlit Panels require a larger box to light the diffuser uniformly. It is double as strong as the edge-light panels and grids (drop) ceilings are really only fitted.
- Lightweight. These panels are ultralight in a sturdy yet basic form. This simplifies the overhead installation in drop-off ceilings.
A Summary of the Different Types of LED Flat Panel Lights
If you’re seeking a shadowless, architecturally pleasant light not really for greater electricity costs, border luminous panels are a great solution. Backlit panels are an excellent alternative for a less priced but more efficient and useful illumination. It is up to you now and what appeals to your particular place! Eventually!
Need Flat Panel Light Fixtures?
As one of the best lighting manufacturers in the United States, LITELUME produces a wide variety of indoor and outdoor light fixtures to accommodate all of your customers’ commercial and residential electrical and lighting project needs. All of our lights come with financing options available. For electricians, contractors and lighting distributors, we provide labor warranties and can help with creating a proposal. Click here for more information about LITELUME.
LITELUME stands behind the quality of its lighting products by offering a 10-year Limited Warranty for all of our light fixtures, mounts, sensors, and more. We also offer a return policy just in case. We provide a number of Financing Options that are also available. Fill out a submit one of our Credit Applications today!
Got a project? Need to order light fixtures in bulk or resell as a distributor? LITELUME is here for all your commercial and residential property lighting needs. Contact us today at (833) 533-5863 or email us at info@litelume.com.
