LL-BLEM-CPLL-BLEM-CP
Constant Power Emergency LED Driver
Works with or without an AC driver to convert new or existing LED fixtures into unobtrusive emergency lighting. Provides constant power output to the load during emergency mode operation. Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures.
Resources
LED illuminated and remote mounted test switch.
Low profile galvanized steel construction.
Compact design allows for installation of non-conduit models, inside most LED fixtures.
Low profile galvanized steel construction.
Compact design allows for installation of non-conduit models, inside most LED fixtures.
Universal 120-277V, 50/60 Hz input.
Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing.
Long-life, maintenance free, rechargeable lithium iron phosphate battery.
Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault.
90-minute minimum emergency operating time over full temperature range.
Output classification: Class 2 Compliant.
Surge protection: Per C62.41 (TVS).
Input overcurrent protection: Fusible link.
24 hour maximum battery recharge time.
Standard models suitable for inside or top mount of LED fixtures.
Conduit models suitable for remote mount to LED fixture.
UL Listed for factory or field installation.
Suitable for damp locations (10°C - 55°C).
Five year warranty on all electronics and housing.
Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes.
Certified to CEC under Title 20 regulations.
Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing.
Long-life, maintenance free, rechargeable lithium iron phosphate battery.
Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault.
90-minute minimum emergency operating time over full temperature range.
Output classification: Class 2 Compliant.
Surge protection: Per C62.41 (TVS).
Input overcurrent protection: Fusible link.
24 hour maximum battery recharge time.
Standard models suitable for inside or top mount of LED fixtures.
Conduit models suitable for remote mount to LED fixture.
UL Listed for factory or field installation.
Suitable for damp locations (10°C - 55°C).
Five year warranty on all electronics and housing.
Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes.
Certified to CEC under Title 20 regulations.
QuickShip Ordering Information
LL-BLEM-CP-5
LL-BLEM-CP-10
LL-BLEM-CP-13
LL-BLEM-CP-5C
LL-BLEM-CP-10C
LL-BLEM-CP-13C
LL-BLEM-CP-5
LL-BLEM-CP-10
LL-BLEM-CP-13
LL-BLEM-CP-5C
LL-BLEM-CP-10C
LL-BLEM-CP-13C
Emergency Type
- Emergency Battery
Listings
- cULus
Emergency Options
- Emergency Battery Backup
- Integral EM Battery
- Remote EM Battery
Ratings & Compliance
- Damp
Voltage
- 120-277 V
Warranty
- 7 yr
Similar Products
In-Stock Collection
LL-CEU
Reduced Profile All LED Exit & Emergency Thermoplastic Combo
View Entire Collection
